OEM Power Adapters for the Medical and Health Care Markets

HPU25 SERIES

HPU25 SERIES

25W External power supplies for medical applications including home healthcare equipment,
patient monitors, blood pressure equipment, portable medical devices, ECG machines, many others

2 Year warranty.

FEATURES
	Wide Operating Voltage, 80 to 275 VAC, 47 to 440 Hz	USA Plug
	Medical Safety 3rd (IEC60601-1 3rd Edition)	Input to Output : 2MOPP
	Single Output	Energy Star 2.0, Efficiency Level V
	Over Voltage and Over Load Protection	Class II System

Electrical Characteristics:

Vins	Safety Approvals Input Voltage Range	Safety Approval & Specification in Label	100-240VAC
Vin	Operate Voltage Range	See derating curve	80-275VAC
Fi	Input Frequency	Sine wave	47-440Hz
Po	Output Power Range	See rating chart	25W
lil	Input Current (Low Line)	lo=Full load, Vin=100VAC	0.7A
lih	Input Current (High Line)	lo=Full load, Vin=240VAC	0.4A
Ir	Low Line inrush Current	lo=Full load, 25°C, Cool start, Vin=100VAC	50A (max.)
Ir	High Line Inrush Current	lo=Full load, 25°C, Cool start, Vin=240VAC	120A (max.)
Eff	Efficiency	lo=Full Load, Vin=230VAC	72-85%
REG-i	Line Regulation	lo=Full Load, Vin=100-240VAC	1% (mAX.)
REG-o	Load Regulation	Vin=230VAC	3-5%
OVP	Over Voltage Protection		Nil
OCP	Over Current Protection	Nil.But,Output protected to short circuit conditions
Ttr	Time of Transient Response	lo=Full Load, Vin=110VAC	4mS (max.)
Thu	Hold-up Time	lo=Full Load, Vin=110VAC	12mS (typ.)
Ts	Start Up Time	lo=Full Load, Vin=100-240VAC	3S (max.)
VP-p	Ripple & Noise (Peak to Peak)	Full Load, Vin=90VAC	1% (max.)
Tc	Temperature Coefficient	All Condition	±0.04%/°C
Pno	No-Load Power Consumption	No load, Vin=230VAC	See rating chart
Vps	Dialechic Withstanding Voltage	Primary to secondary	6420VDC (min.)
EMI	EMC Emission	Compliance to EN55011 (CISPR11), EN61000-3-2,-3	B Class

Environmental:

To	Operating Temperature	See derating curve	-10-70°C
Ts	Storage Temperature	10 — 95% RH	-40-85°C
Ho	Operating Humidity	Non-condensing	0-95% RH
Hr	Storage Humidity	See Rating Chart	0-95% RH
Vsg	Surge Voltage	All Condition	2kV (min.)
ESDa	Electro Static Discharge	Air Discharge, IEC61000-4-2	8kV (min.)
ESDc	Electro Static Discharge	Contact Discharge, IEC61000-4-2	6kV (min.)
MTBF	Mean Time Between Failure	Operating temperature at 25°C, Calculated per MIL-HDBK-217F	0.1M Hrs (min.)
ELEV	Operating Altitude (Elevation)	All condition	5000m (max.)
VBR	Vibration	10 ~ 500Hz, 10min./1cycle,60min. Each along x, Y, Z axes.	5G (min.)

Mechanical Specifications:

1. Operating Temperature: -10 to 70°C
2. Derate linearly from 100% load at 40°C to 50% load at 70°C

Output Voltage and Current Rating Chart ( Single Output )

Model No.	Output Voltage	Output Current	Total Regulation	Max. Output Power	Pno (max)
HPU25-101	3.3 VDC	2.18 A	5%	7.2W	0.3W
HPU25-102	5.0 VDC	2.40 ~ 1.84 A	5%	12W	0.3W
HPU25-103	6 ~ 7 VDC	1.60 ~ 1.50 A	5%	12W	0.3W
HPU25-104	8 ~ 11 VDC	1.80 ~ 1.68 A	5%	13.5W	0.3W
HPU25-105	12 ~ 13 VDC	1.25 ~ 1.15 A	5%	15W	0.3W
HPU25-106	14 ~ 16 VDC	1.07~ 0.93 A	5%	15W	0.3W
HPU25-107	17 ~ 20 VDC	0.88 ~ 0.71 A	5%	15W	0.3W
HPU25-108	21 ~ 26 VDC	0.68 ~ 0.55 A	5%	15W	0.3W
HPU25-109	27 ~ 32 VDC	0.53 ~ 0.45 A	3%	15W	0.3W
HPU25-110	33 ~ 39 VDC	0.44 ~ 0.37 A	3%	15W	0.3W
HPU25-111	40 ~ 50 VDC	0.36 ~ 0.30 A	3%	15W	0.3W
HPU25-112	51 ~ 55 VDC	0.29 ~ 0.27 A	3%	15W	0.3W

HPU25-101~104 are required to use AWG#18/4FT output cable.
HPU25-105~109 are required to use AWG#20/4FT output cable.
HPU25-110~112 are required to use AWG#22/4FT output cable.
The will be changed by modified output cable. electrical characteristics